Industry
Rollers for wood, plywood and panel lines
Glue spreader, feed and pressing rollers for plywood, laminate and panel lines.
Request a quoteRollers for wood & plywood
Plywood and panel lines use rollers to spread glue, feed boards and press laminates. Glue spreader rollers need adhesive-resistant covers with a controlled groove or surface, and feed rollers need grip and wear resistance.
We supply PU rollers, silicone rollers and hard chrome rollers for these machines.
Typical rollers we supply
- Glue spreader rollers
- Feed rollers
- Laminate pressing rollers
- Sanding machine rollers
What matters
What wood & plywood buyers need from a rubber supplier
Glue resistance
Covers that resist adhesives and clean easily.
Grip and wear resistance
Feed rollers that move boards without slipping.
Even pressure
Uniform hardness for consistent glue spread and pressing.
Relevant products and processes
How we work
From your old roller or drawing to a roller that runs true
01
Roller review
We check your drawing or old roller, confirm diameter, face length, journals and the hardness you need.
02
Cover selection
A cover compound is proposed for the inks, chemicals and temperatures your roller sees in service.
03
Core and covering
The core is prepared or made new, then the cover is applied without porosity and cured.
04
Grinding and inspection
Ground true to the bearing seats, finished as specified, and checked for hardness and run-out before dispatch.
FAQ
Common questions
Can you re-cover glue spreader rollers?
Yes. Send the roller or its drawing along with the adhesive type, and we will re-cover and groove it to suit.
Need a new roller or a re-cover?
Share your roller drawing or sample, required hardness and what it contacts. Our team will recommend a cover and respond with a quotation.