Products
Industrial rubber rollers
Our full roller range, built new or re-covered on your cores. Choose a roller to see features, applications and specifications.
Printing & lamination rollers
Rubber & polymer covered rollers
Metal finish & speciality rollers
Materials
Roller cover materials
Temperature ranges are general reference values. Final compound selection depends on your inks, chemicals, temperature and duty.
| Material | Typical range | Key strengths |
|---|---|---|
| Nitrile (NBR)The standard cover for oil-based inks, solvents and greases. Widely used on printing, lamination and general industrial rollers. | -30 °C to +100 °C | Oil and solvent ink resistance · Good abrasion resistance · Cost-effective |
| EPDMResists water-based and UV inks, ketones, hot water, steam and ozone. Not suited to mineral oils. | -50 °C to +150 °C | UV and water-based inks · Hot water and steam · Ozone and weather resistance |
| Silicone (VMQ)High heat resistance and a naturally non-stick surface. Used for hot lamination, coating, sealing and release duties. | -60 °C to +200 °C | High temperature · Release / non-stick · Food-grade compounds available |
| Polyurethane (PU)Outstanding abrasion and cut resistance with high load capacity. Used for feed, pinch, conveyor and heavy-duty rollers. | -30 °C to +80 °C | Abrasion and cut resistance · High load capacity · Good dynamic properties |
| Ebonite (hard rubber)Fully hardened rubber: rigid, machinable and resistant to many acids and chemicals. Used for textile, paper and chemical rollers. | -10 °C to +80 °C | Rigid, non-deforming surface · Chemical resistance · Machinable to profile |
| Neoprene (CR)Balanced resistance to weather, moderate oils and flame. A good general-purpose cover for industrial and printing rollers. | -40 °C to +110 °C | Moderate oil resistance · Good weathering · Tough and resilient |
| Natural RubberHigh resilience, grip and tear resistance. Suited to feed, draw and conveyor rollers where oil exposure is limited. | -50 °C to +80 °C | High resilience and grip · Abrasion resistance · Economical |
Need a new roller or a re-cover?
Share your roller drawing or sample, required hardness and what it contacts. Our team will recommend a cover and respond with a quotation.