Industry
Rubber rollers for textile machinery
Ebonite, EPDM and crook rollers for textile processing, dyeing and finishing.
Request a quoteRollers for textile
Textile processing exposes rollers to dyes, chemicals, hot water and steam. Padding mangles need even pressure across wide faces, and feed rollers need grip without marking the fabric.
We supply ebonite rollers, EPDM rollers and crook rollers for dyeing, padding, finishing and handling, new or re-covered.
Typical rollers we supply
- Padding mangle rollers
- Ebonite guide rollers
- Crook and feed rollers
- Squeeze rollers
What matters
What textile buyers need from a rubber supplier
Chemical resistance
Covers that hold up to dyes, alkalis and hot water.
Even pressure
Uniform hardness across wide faces for consistent pick-up.
Grip without marking
Patterns and compounds that move fabric without damaging it.
Relevant products and processes
How we work
From your old roller or drawing to a roller that runs true
01
Roller review
We check your drawing or old roller, confirm diameter, face length, journals and the hardness you need.
02
Cover selection
A cover compound is proposed for the inks, chemicals and temperatures your roller sees in service.
03
Core and covering
The core is prepared or made new, then the cover is applied without porosity and cured.
04
Grinding and inspection
Ground true to the bearing seats, finished as specified, and checked for hardness and run-out before dispatch.
FAQ
Common questions
Which roller cover suits hot water and steam in textile processing?
EPDM is the usual choice. Ebonite suits rigid guide positions with chemical exposure. Share your process details and we will recommend a cover.
Need a new roller or a re-cover?
Share your roller drawing or sample, required hardness and what it contacts. Our team will recommend a cover and respond with a quotation.